LIPSLX/ CARPS2 Printer Driver for Linux Ver.5.50 (32bit & 64bit)

ダウンロード前に下記の使用許諾契約書を必ずお読みください。
ダウンロードを開始された場合には本許諾書に同意されたものとさせていただきます。

  • 一つ前の画面にもどる

更新日:2022年7月7日

使用許諾契約書

[1] キヤノン株式会社またはそのライセンサーのソフトウェアに関する使用許諾契約

重要

これは、本書とともに提供されるキヤノン株式会社(以下キヤノンといいます。)のLinux向けドライバー製品(以下本製品といいます。)中に格納されているソフトウェア(Readmeファイルの付録の別表1に記載されているモジュールをいい、以下本ソフトウェアといいます。)を、お客様がご使用になるための、お客様とキヤノンとの間の契約です。

本ソフトウェアをご使用になる前に、本契約に記載されているすべての権利および制限をよくお読みください。

下記第1項記載の態様で本ソフトウェアを使用することにより、お客様は本契約に記載されたすべての条件に同意されたものとします。お客様が本契約の条件のうち、いずれかに同意されない場合には、本ソフトウェアを使用せず、直ちにこれを入手した場所にご返却ください。

1.許諾

キヤノンは、本ソフトウェアを本製品においてのみ使用し、使用させ、複製し、複製させ、第三者に頒布し、かかる第三者に使用を許可するための、個人的、限定的かつ非独占的権利をお客様に許諾します。(本契約における「使用」とは、本ソフトウェアを格納、ロードもしくはインストールすること、またはコンピューターにおいて表示すること、アクセスすること、もしくは実行することのいずれも含むものとします。)
お客様は、本ソフトウェアを自己使用目的の場合に限り、これを変更することができ、並びにかかる変更物をデバッグする目的に限り、これをリバースエンジニアすることができます。お客様は、本契約と同一の条件の下で第三者に本ソフトウェアを頒布するものとします。

2.制限

本契約において明示的に許諾されているものを除き、お客様は、本ソフトウェアを使用できないものとし、並びにいかなる第三者にも譲渡、サブライセンス、販売、貸与または移転することはできません。

3.著作権表示

お客様は、本ソフトウェアに含まれるキヤノンまたはそのライセンサーの著作権表示を変更、除去、削除等することはできません。

4.帰属

本ソフトウェアに係る所有権および知的財産権は、その内容によりキヤノンまたはそのライセンサーに帰属します。本契約に明示的に記載されているものを除き、キヤノンおよびそのライセンサーのあらゆる知的財産についていかなる権利または実施権も、本契約により、お客様に譲渡または許諾されるものではありません。

5.輸出規制

お客様は、該当国の全ての輸出管理法、規制および規則を遵守するものとし、当該輸出管理法、規制および規則に違反して、または必要な認可等を得ることなしに本ソフトウェアを直接または間接に輸出または再輸出してはなりません。

6.保証の否認および免責

本ソフトウェアは、『あるがまま』の状態で商品性および特定の目的への適合性の黙示的保証を含め、明示たると黙示たるとを問わずいかなる保証もなく提供されるものとします。
本ソフトウェアの品質、機能およびパフォーマンス、その他についてのあらゆる危険性はお客様の責任および負担となります。

キヤノン、その子会社、関連会社、それらの販売代理店または販売店、またはキヤノンのライセンサーのいずれも、本ソフトウェアの使用または使用不能から生ずるいかなる損害に対しても、一切の責任を負わないものとします。例え、キヤノン、その子会社、関連会社、それらの販売代理店または販売店、またはキヤノンのライセンサーがかかる損害の可能性について知らされていた場合でも同様です。(本契約に言う「いかなる損害」とは、逸失利益およびその他の派生的または付随的な損害を含み、またこれらに限定されない全ての損害をいいます。)

適用法において認められる限りにおいて、キヤノン、その子会社、関連会社、それらの販売代理店または販売店、またはキヤノンのライセンサーのいずれも、本ソフトウェアまたはその使用に起因または関連して生じたいかなる紛争について、一切責任を負わないものとします。

7.期間

本契約は、お客様が本ソフトウェアを使用することにより本契約を承諾した時点で発効します。お客様は、本ソフトウェアを廃棄することにより、本契約を終了させることができます。

お客様が本契約のいずれかの条項に違反した場合、キヤノンは、本契約を一方的に終了することができます。かかる違反により本契約が終了した場合、キヤノンがその法律上の権利を実施できることに加え、お客様は直ちに本ソフトウェアを廃棄するものとします。

上記にかかわらず、本契約の第4項および第6項から第10項の規定は、本契約のいかなる終了後も有効に存続します。

8.U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE

“米国政府エンドユーザー”とは、米国政府の機関また団体を意味します。もしお客様が米国政府エンドユーザーである場合、以下の規定が適用されます : The SOFTWARE is "commercial items," as that term is defined at 48 C.F.R. 2.101 (October 1995), consisting of "commercial computer software" as such terms are used in 48 C.F.R. 12.212 (September 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users shall acquire the SOFTWARE with only those rights set forth herein.
The manufacturer is Canon Inc./ 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan.

本条項で使用される"the SOFTWARE"とは、本契約で定義される本ソフトウェアを意味し、指し示すものとします。

9.分離可能性

本契約のいずれかの条項またはその一部が管轄権を有する法域におけるあらゆる裁判所により無効であると決定された場合、当該条項はかかる裁判所の法域においては無効とし、その他の条項は完全に有効に存続するものとします。

10.確認

本契約は、標題に関するお客様とキヤノンの間の完全かつ唯一の合意であり、口頭または書面にかかわらず、本契約の標題に関する全ての申し出、事前の合意、その他お客様とキヤノンの間の全ての交信に優先することとします。

025546

[2] GNU GENERAL PUBLIC LICENSEに基づき許諾されるフリーソフトウェア・モジュールについて

重要

本製品は、GNU General Public License Version 2に基づき許諾される、Readmeファイルの付録の別表2記載のフリーソフトウェア・モジュールを含んでいます。

かかるモジュールはフリーソフトウェアです。お客様は、Free Software Foundationが定めたGNU General Public License Version 2の条件に従ってかかるモジュールを再頒布または変更することができます。

かかるモジュールは有用と思いますが、頒布にあたっては、市場性及び特定目的適合性についての暗黙の保証を含めて、いかなる保証も行ないません。後に、GNU General Public License Version 2の全文を記載します。詳細についてはそれをお読みください。

GNU GENERAL PUBLIC LICENSE
Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission.
For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURP OS E. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE C OS T OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO L OS S OF DATA OR DATA BEING RENDERED INACCURATE OR L OS SES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE P OS SIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.

one line to give the program's name and an idea of what it does.
Copyright (C) yyyy name of author

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURP OS E. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.

signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice

This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library.
If this is what you want to do, use the GNU Library General Public License instead of this License.

[3] その他のフリーソフトウェア・モジュールについて

重要

本製品に含まれている、Readmeファイルの付録の別表3記載のモジュールは、フリーソフトウェア・モジュールです。

かかるモジュールは、下記条件に定める"Software"とみなされるものとし、お客様は下記条件に従ってかかるモジュールを使用等することができるものとします。

Copyright (c) 2007 Canon Inc.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURP OS E AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

  • ダウンロード
ファイル容量
72,810,261 byte

注意・制限事項

ダウンロード時のご注意
  • ダウンロードファイルは、ハードディスク上で解凍の上、ハードディスクからインストールを行ってください。
制限事項
  • 本プログラムおよび付随する情報などは、キヤノン (株) が独自に開発しキヤノンマーケティングジャパン (株) が配布するものです。
  • 本プログラムおよび付随する情報などに対応するプリンターの製造元であるキヤノン (株) 、配布元であるキヤノンマーケティングジャパン (株) は、本プログラムおよび付随する情報などに関するお問い合せは受け付けておりません。
  • 本ドライバーは、IPA (情報処理推進機構) の2003年度オープンソースソフトウエア活用基盤整備事業である「共通のオープンプリンティングシステムの開発」の成果に沿ったものです。
  • LIPSLX、UFR II (US) 、UFR II (UK) のドライバーのパッケージのうち、2つ以上がインストールされている環境で、1つのパッケージだけアップデートインストールを行うと、アップデートインストール時にエラーが発生します。この問題は、インストールされているすべてのパッケージを一緒にアップデートすることで回避できます。
  • 注意制限事項などの詳細は、解凍したフォルダー内のREADMEファイルをご覧ください。

インストールについて

  • ソースファイルは、ダウンロードしたファイルに格納されています。
  • Debian系OSでのドライバーインストール方法については下記をご覧ください。

Debianパッケージのインストール・アンインストール方法(LIPS4/ LIPSLX)

インストールには、インストーラを使用する方法と、手動で行う方法があります。
  • インストール方法、使用方法の詳細は、ユーザーズガイドをご覧ください。
ユーザーズガイド
[ファイル容量 : 736,064 byte] PDFを開く

ソフトウエア概要

名称 LIPSLX/ CARPS2 Printer Driver for Linux Ver.5.50 (32bit & 64bit)
ソフト概要 このドライバーは、キヤノンデバイスに対応した、Linux OS 用のプリンタードライバーです。Linux OS 向けの印刷システムCUPS (Common UNIX Printing System) を使用します。このドライバーをインストールすると、GUI (Graphical User Interface) の設定画面およびコマンドラインから、デバイス固有の機能を設定して印刷できます。
対象製品
Satera LASER BEAM PRINTER / LASER SHOT
LBP9950Ci/ LBP9900Ci/ LBP9660Ci/ LBP9650Ci/ LBP961Ci/ LBP9600C/ LBP9520C/ LBP9510C/ LBP9500C/ LBP8900/ LBP8730i/ LBP8720/ LBP8710e/ LBP8710/ LBP8630/ LBP8620/ LBP8610/ LBP853Ci/ LBP852Ci/ LBP851C/ LBP843Ci/ LBP842C/ LBP841C/ LBP7700C/ LBP7600C/ LBP722Ci/ LBP712Ci/ LBP6710i/ LBP6700/ LBP664C/ LBP662C/ LBP661C/ LBP6600/ LBP654C/ LBP652C/ LBP651C/ LBP622C/ LBP621C/ LBP612C/ LBP611C/ LBP5910F/ LBP5910/ LBP5900SE/ LBP5900/ LBP5400/ LBP4510/ LBP4500/ LBP443i/ LBP442/ LBP441e/ LBP441/ LBP3980/ LBP3970/ LBP3950/ LBP3930/ LBP3920/ LBP3910/ LBP3900/ LBP3800/ LBP3700/ LBP352i/ LBP351i/ LBP3410/ LBP322i/ LBP321/ LBP312i/ LBP252/ LBP251/ LBP224/ LBP221/ LBP162L/ LBP162/ LBP161
imagePRESS
imagePRESS C910/ imagePRESS C850/ imagePRESS C810/ imagePRESS C800/ imagePRESS C750/ imagePRESS C700L/ imagePRESS C700/ imagePRESS C660/ imagePRESS C650/ imagePRESS C270/ imagePRESS C265/ imagePRESS C170/ imagePRESS C165/ imagePRESS C1+/ imagePRESS C1
imageRUNNER ADVANCE
iR-ADV C9280 PRO/ iR-ADV C9270 PRO/ iR-ADV C9075 PRO/ iR-ADV C9065 PRO/ iR-ADV C7780/ iR-ADV C7770/ iR-ADV C7765/ iR-ADV C7580 III/ iR-ADV C7580/ iR-ADV C7570 III/ iR-ADV C7570/ iR-ADV C7565 III/ iR-ADV C7565/ iR-ADV C7270/ iR-ADV C7260/ iR-ADV C7065/ iR-ADV C7055/ iR-ADV C5870F/ iR-ADV C5860F/ iR-ADV C5850F/ iR-ADV C5840F/ iR-ADV C5760F/ iR-ADV C5750F/ iR-ADV C5740F/ iR-ADV C5735F/ iR-ADV C5560F-R/ iR-ADV C5560F III/ iR-ADV C5560F/ iR-ADV C5560/ iR-ADV C5550F-R/ iR-ADV C5550F III/ iR-ADV C5550F/ iR-ADV C5550/ iR-ADV C5540F-R/ iR-ADV C5540F III/ iR-ADV C5540F/ iR-ADV C5540/ iR-ADV C5535F III/ iR-ADV C5535F/ iR-ADV C5535/ iR-ADV C5255F-R/ iR-ADV C5255F/ iR-ADV C5255/ iR-ADV C5250F/ iR-ADV C5250/ iR-ADV C5240F-R/ iR-ADV C5240F/ iR-ADV C5240/ iR-ADV C5235F/ iR-ADV C5235/ iR-ADV C5051F-R/ iR-ADV C5051F/ iR-ADV C5051/ iR-ADV C5045F/ iR-ADV C5045/ iR-ADV C5035F-R/ iR-ADV C5035F/ iR-ADV C5035/ iR-ADV C5030F/ iR-ADV C5030/ iR-ADV C3835F/ iR-ADV C3830F/ iR-ADV C3826F/ iR-ADV C3730F/ iR-ADV C3720F/ iR-ADV C357F/ iR-ADV C356F III/ iR-ADV C356F II/ iR-ADV C355F/ iR-ADV C3530F III/ iR-ADV C3530F/ iR-ADV C3530/ iR-ADV C3520F III/ iR-ADV C3520F/ iR-ADV C350F/ iR-ADV C3330F-RG/ iR-ADV C3330F/ iR-ADV C3330/ iR-ADV C3320F/ iR-ADV C2230F/ iR-ADV C2220F/ iR-ADV C2220/ iR-ADV C2218F-V/ iR-ADV C2030F-R/ iR-ADV C2030F/ iR-ADV C2030/ iR-ADV C2020F/ iR-ADV C2020/ iR-ADV 8795B/ iR-ADV 8795/ iR-ADV 8786B/ iR-ADV 8786/ iR-ADV 8705B/ iR-ADV 8705/ iR-ADV 8595B III/ iR-ADV 8595B/ iR-ADV 8595 III/ iR-ADV 8595/ iR-ADV 8585B III/ iR-ADV 8585B/ iR-ADV 8585 III/ iR-ADV 8585/ iR-ADV 8505B III/ iR-ADV 8505B/ iR-ADV 8505 III/ iR-ADV 8505/ iR-ADV 8295 PRO/ iR-ADV 8295 B/ iR-ADV 8285 PRO/ iR-ADV 8285 B/ iR-ADV 8205 PRO/ iR-ADV 8205 B/ iR-ADV 8105 PRO/ iR-ADV 8105 B/ iR-ADV 8095 PRO/ iR-ADV 8095 B/ iR-ADV 8085 PRO/ iR-ADV 8085 B/ iR-ADV 6870/ iR-ADV 6860/ iR-ADV 6780/ iR-ADV 6765/ iR-ADV 6575 III/ iR-ADV 6575/ iR-ADV 6565 III/ iR-ADV 6565/ iR-ADV 6560 III/ iR-ADV 6560/ iR-ADV 6555/ iR-ADV 6275/ iR-ADV 6265-R/ iR-ADV 6265/ iR-ADV 6255/ iR-ADV 6075/ iR-ADV 6065-R/ iR-ADV 6065/ iR-ADV 6055/ iR-ADV 6000/ iR-ADV 4745F/ iR-ADV 4735F/ iR-ADV 4725F/ iR-ADV 4545F III/ iR-ADV 4545F/ iR-ADV 4545/ iR-ADV 4535F III/ iR-ADV 4535F/ iR-ADV 4535/ iR-ADV 4525F III/ iR-ADV 4525F/ iR-ADV 4525/ iR-ADV 4245F-R/ iR-ADV 4245F/ iR-ADV 4245/ iR-ADV 4235F/ iR-ADV 4235/ iR-ADV 4225F/ iR-ADV 4225/ iR-ADV 4045F-R/ iR-ADV 4045F/ iR-ADV 4045/ iR-ADV 4035F/ iR-ADV 4035/ iR-ADV 4025F-R/ iR-ADV 4025F/ iR-ADV 4025/ iR C3222F/ iR C3020F
Color imageRUNNER
iR C6880N/ iR C6870N/ iR C6870/ iR C5880N/ iR C5870N/ iR C5870/ iR C5185N/ iR C5185/ iR C5180N/ iR C5180/ iR C4580F/ iR C4580/ iR C4080F/ iR C4080/ iR C3880F/ iR C3880/ iR C3580F/ iR C3580/ iR C3380F/ iR C3380/ iR C3080F/ iR C3080/ iR C2880F/ iR C2880/ iR C2550F/ iR C2110N/ iR C2110F
imageRUNNER / MEDIO
iR8570N/ iR7270N/ iR7105i/ iR7105B/ iR7095i/ iR7086N/ iR7086B/ iR6570N/ iR6570/ iR5570N/ iR5570/ iR5075N/ iR5065N/ iR5065/ iR5055N/ iR5055/ iR4570F/ iR4570/ iR3570F/ iR3570/ iR3245F-R/ iR3245F/ iR3245/ iR3235F/ iR3235/ iR3225F-R/ iR3225F/ iR3225/ iR3045F/ iR3045/ iR3035F-R/ iR3035F/ iR3035/ iR3025F-R/ iR3025F/ iR3025/ iR2870F/ iR2870/ iR2270F/ iR2270/ iR2230F/ iR105i
Satera MULTI FUNCTION PRINTER
MF8570Cdw/ MF832Cdw/ MF7525F/ MF745Cdw/ MF743Cdw/ MF741Cdw/ MF735Cdw/ MF733Cdw/ MF731Cdw/ MF726Cdw/ MF722Cdw/ MF6880dw/ MF656Cdw/ MF654Cdw/ MF644Cdw/ MF642Cdw/ MF634Cdw/ MF632Cdw/ MF628Cw/ MF551dw/ MF541dw/ MF521dw/ MF511dw/ MF457dw/ MF447dw/ MF417dw/ MF269dw/ MF266dn/ MF265dw/ MF264dw/ MF262dw/ MF249dw/ MF245dw/ MF244dw/ MF242dw/ MF236n/ MF232w
作成者 キヤノン株式会社
掲載者 キヤノンマーケティングジャパン株式会社
転載条件 許可無く転載不可
使用条件 このソフトウエアをダウンロードする前に、本ページ冒頭に記載してあります「使用許諾契約書」を必ずお読みください。

変更履歴

Ver.5.40からVer.5.50への変更点
  1. imagePRESS C270/ C265に対応しました。
  2. 本バージョンの動作確認済OSを追加しました。
  3. iR-ADV C3800シリーズ、iR C3222Fにおいて、和紙用紙種類を非サポートにしました。
  4. iR-ADV C5800シリーズ、iR-ADV 6800シリーズにおいて、折りの選択肢に「サドルC 折り」を追加しました。
  5. iPR C270/ C265、iR-ADV C5800シリーズ、iR-ADV 6800シリーズにおいて、サドル折り時の排紙順指定に対応しました。
  6. ドライバーパッケージの圧縮形式を変更しました。
  7. パッケージのダブルクリックインストールに対応しました。
  8. UOS向けドライバーパッケージに対応しました。
  9. Kylin向けドライバーパッケージに対応しました。
  10. インストールシェルに必要なパッケージを追加しました。
Ver.5.30からVer.5.40への変更点
  1. 本バージョンの動作確認済OSを追加しました。
  2. MF832Cdw、MF656Cdw/ 654Cdw、MF551dw、MF457dw、LBP961Ci、LBP722Ciに対応しました。
Ver.5.20からVer.5.30への変更点
  1. iR-ADV C3800シリーズ、iR-ADV C5800シリーズに対応しました。
  2. iR-ADV 6800シリーズに対応しました。
  3. iR C3222Fに対応しました。
  4. 本バージョンの動作確認済OSを追加しました。
Ver.5.10からVer.5.20への変更点
  1. iR-ADV C357Fに対応しました。
  2. imagePRESS C170に対応しました。
  3. プリンター登録ユーティリティから双方向通信としてプリンター登録に対応しました。
  4. iPR C910/ C810/ C660において、用紙種類の合成紙・ポリプロピレン・ポリエステルに対応しました。
    ※本体ファームウエアの更新が必要です。 (MN-CONT Ver.08.38 以降)
  5. iPR C910/ C810/ C660において、多段デッキ・D1に対応しました。
    ※本体ファームウエアの更新が必要です。 (MN-CONT Ver.08.38 以降)
  6. MF7525F (MN-CONT Ver.03.15 以降) において、封筒 長形4号、封筒 長形40号に対応しました。
Ver.5.00からVer.5.10への変更点
  1. iR-ADV C7700シリーズ、iR-ADV C5700シリーズ、iR-ADV C3700シリーズに対応しました。
  2. iR-ADV 8700シリーズ、iR-ADV 6700シリーズ、iR-ADV 6000、iR-ADV 4700シリーズに対応しました。
  3. MF269dw/ MF266dn/ MF265dw/ MF264dw/ MF262dwに対応しました。
Ver.3.70からVer.5.00への変更点
  1. imagePRESS C910/ C810/ C660、imagePRESS C165に対応しました。
  2. LBP664C/ 662C/ 661C/ 622C/ 621Cに対応しました。
  3. LBP162/ 162L/ 161、LBP322i/ LBP321/ LBP224/ LBP221に対応しました。
  4. MF745Cdw/ 743Cdw/ 741Cdw、MF644Cdw/ 642Cdw、MF7525F、MF541dw、MF447dwに対応しました。
  5. [モノクロ部分を含む印刷データを補正する] 機能を削除しました。
  6. iR-ADV 4500シリーズ (III) において、封筒用紙の余白仕様を変更しました。
  7. ドライバーファイルの構成を変更しました。
Ver.3.60からVer.3.70への変更点
  1. iR-ADV C7500シリーズ (III) 、iR-ADV C5500シリーズ (III) 、iR-ADV C3500シリーズ (III) 、iR-ADV C356F III に対応しました。
  2. iR-ADV 8500シリーズ (III) 、iR-ADV 6500シリーズ (III) 、iR-ADV 4500シリーズ (III) に対応しました。
  3. LBP853Ci/ 852Ci/ 851Cに対応しました。
Ver.3.50からVer.3.60への変更点
  1. MF521dwに対応しました。
  2. ORCAからの印刷において、Ghost Scriptが出力するデータを印刷すると白抜き画像部分に薄くドット模様が印字される不具合対応のため、「白抜き部分を含む印刷データを補正する」機能を追加しました。
Ver.3.40からVer.3.50への変更点
  1. LBP652C/ LBP654C、MF735Cdw、LBP443i/ LBP442/ LBP441/ LBP441e、iR-ADV C356F II、LBP651C/ LBP612C/ LBP611C、MF731Cdw/ MF733Cdw、MF632Cdw/ MF634Cdw、iR C3020F (インナーフィニッシャー・K1対応) に対応しました。
  2. 「セキュアプリント設定」ダイアログ、「ID/パスワードの設定」ダイアログ、「ユーザー名/パスワードの設定」ダイアログに表示されている文言の「パスワード」を「暗証番号」に変更しました。
  3. プリンター登録ユーティリティに以下の機能を追加しました。
    ・ RPM系OS (Fedora、CentOS) で、ユーザーが一般権限でプリンター登録ユーティリティを起動した場合、警告メッセージを表示する。
    ・ プリンター登録ができなかった場合、もしくは不正なキューが登録された場合、警告メッセージを表示する。
    ・ プリンター削除をする場合、確認メッセージを表示する。
Ver.3.31からVer.3.40への変更点
  1. iPR C850/ C750に対応しました。
  2. iR-ADV 4545/ 4525/ 4535、iR-ADV C7580/ C7570/ C7565、iR-ADV C355、iR-ADV 6560、iR-ADV C3520/ C3530に対応しました。
  3. imageRUNNER C3020Fに対応しました。
  4. LBP312iに対応しました。
  5. MF249dw/ MF245dw/ MF244dw/ MF242dw/ MF236n/ MF232wに対応しました。
  6. 本バージョンからの対応機種において、socket接続でのプリンター登録と印刷に対応しました。
  7. 印刷時にキャリブレーション、レジストレーション処理を行うデバイスにおいて、通信経路 (デバイスURI) がsocketの場合にも双方向処理を行い、デバイスからキャリブレーションデータ、またはレジストレーションデータの取得を行うよう変更しました。
  8. モノクロ1bitのデータをGhostscriptが解釈できず、印字不正が発生する対策として、[モノクロ部分を含む印刷データを補正する]を追加しました。
  9. imageRUNNER C3020Fにおいて、パフォーマンス向上のため、イメージモード時に生成するJPEGイメージデータを、WJPEG (YUV) 形式の圧縮に変更しました。
  10. プリンター登録までの手順を簡略化するため、ドライバーのインストールが完了した場合、プリンター登録ユーティリティを起動する処理を追加しました。
Ver.3.20からVer.3.31への変更点
  1. iR-ADV C5560/ C5550/ C5540/ C5535に対応しました。
  2. LBP712Ci、LBP843Ci/ 842C/ 841Cに対応しました。
  3. imagePRESS C650に対応しました。
  4. iR-ADV C5560/ C5550/ C5540/ C5535において、「長形3号」「洋長形3号」の用紙サイズの余白の仕様を変更しました。
  5. iR-ADV C5560/ C5550/ C5540/ C5535において、用紙タイプのタブ紙1、タブ紙2 の範囲を薄い区分に変更し、厚い区分用にタブ紙3、タブ紙4 を追加しました。
  6. LBP712Ci、LBP7600Cにおいて、「仕上げ」タブシートに「画像特殊処理」を追加しました。
  7. iR-ADV C5560/ C5550/ C5540/ C5535、iR-ADV 8505/ 8595/ 8585、iR-ADV 6575/ 6565/ 6555において、サドル折りに対応しました。
    ※プラットフォームバージョンV3.4以降で対応
  8. iR-ADV C5560/ C5550/ C5540/ C5535において、デバイスにダウンロードされたカスタムプロファイルをドライバーから指定し印刷できるよう変更しました。※プラットフォームバージョンV3.4以降で対応
  9. 「仕上げシート」の「処理オプション」ダイアログ、「特殊印字モードC」の選択肢に、「パネル優先」を追加し、デフォルト設定としました。
  10. iR-ADV C5235/ 5240、iR-ADV C5250/ 5255において、ColorGear v3.2.4 に対応しました。
Ver.3.10からVer.3.20への変更点
  1. iR-ADV 8505/ 8595/ 8585、iR-ADV 6575/ 6565/ 6555に対応しました。
  2. LBP352i/ 351i、LBP252/ 251に対応しました。
  3. MF511dw/ MF417dwに対応しました
  4. iR-ADV 8505/ 8595/ 8585、iR-ADV 6575/ 6565/ 6555において、ユーザー認証機能に対応しました。
  5. MF511dw/ MF417dw、LBP252/ 251において、特殊印字モードAに対応しました。
  6. MF511dw/ MF417dw、LBP252/ 251において、特殊印字モードBに対応しました。
Ver.3.00からVer.3.10への変更点
  1. iR-ADV C3320/ 3330、LBP9950Ci、LBP9900Ci、MF726Cdw、MF722Cdw、MF628Cwに対応しました。
  2. LB7600C、LBP9510C、LBP9650Ci、LBP9520C、LBP9660Ci、iR-ADVC 5235/ 5240、iR-ADV C5250/ 5255、iR-ADV C9270/ 9280、iR-ADV C7260/ 7270、iR-ADV C2220/ 2230、iR-ADV C2218、iR-ADV C350、iR-ADV C3320/ 3330、iPR C700/ 800、LBP9950Ci、LBP9900Ciにおいて、右側1ドット印字が欠けてしまう不具合に対応しました。
  3. iR-ADV C3320/ 3330のインナーフィニッシャー・G1対応に伴い、「針なしとじ」に対応しました。
  4. iPR C700/ 800において、大容量スタッカー・G1に対応しました。
  5. MF726Cdw、MF722Cdw、MF628Cwにおいて、郵便番号部分の印刷が欠けないように封筒サイズの余白のデフォルト設定値を変更しました。
Ver.2.90からVer.3.00への変更点
  1. iPR C700/ C700L/ C800に対応しました。
  2. LBP8900に対応しました。
  3. iPR C700/ C700L/ C800において、文字・線などの特定のオブジェクトを太くする機能に対応しました。
  4. iPR C700/ C700L/ C800において、画像圧縮最適化機能を追加しました。
  5. iR-ADV C350において、カラー印刷時のトナー量補正機能を追加しました。
  6. LBP6710i/ LBP6700において、定着性改善のため特殊印字モードCを追加しました。
  7. インストーラに対応しました。
  8. 特殊スムージングモードの画質改善に対応しました。
  9. iPR C700/ C700L/ C800において、JpegイメージデータについてJP20形式圧縮に対応しました。
  10. iR C2110F/ iR C2110N/ MF8570Cdw/ LBP5400/ LBP5900において、カラー自動判定機能を削除しました。
Ver.2.80からVer.2.90への変更点
  1. iR-ADV C350に対応しました。
  2. LBP8730i、LBP8720/ 8710e/ 8710に対応しました。
  3. iR-ADV C350において、シャープネス (写真) の機能を追加しました。
  4. iR-ADV C350において、トナー印字量補正機能に対応しました。
  5. LBP8730i、LBP8720/ 8710e/ 8710において、A4/ Letterを縦搬送の印刷に対応しました。
  6. 以下の機種において、従来の認証方法とセキュリティー強化した認証方法の切り替え機能を [デバイス設定] シートに追加しました。
    ・ iR-ADV 6255/ 6265、iR-ADV 6275、iR-ADV 8205、iR-ADV 8285/ 8295、iR-ADV C2218、iR-ADV C2220/ 2230、iR-ADV C5250/ 5255、iR-ADV C5235/ 5240、iR-ADV C9270/ 9280、iR-ADV C7260/ 7270
  7. パッケージに入っているICCプロファイルをすべてcommonパッケージに移行しました。
Ver.2.70からVer.2.80への変更点
  1. iR-ADV 4225/ 4235、iR-ADV 4245に対応しました。
  2. LBP9660Ci、LBP9520Cに対応しました。
  3. MF6880dwに対応しました。
  4. LBP9660Ci、LBP9520Cにおいて、バーコード調整機能を追加しました。
  5. LBP9660Ci、LBP9520Cにおいて、給紙シートに [A4/A5/レターを縦送りする] を追加しました。
  6. iR-ADV 4225/ 4235、iR-ADV 4245において、部門管理、セキュアプリント時のパスワード暗号化に対応しました。
  7. LBP7600Cにおいて、用紙タイプに「普通紙H」を追加しました。
  8. iR-ADV C2020/ 2030において、N-up製本に対応しました。
  9. Copyright表記を変更しました。
Ver.2.60からVer.2.70への変更点
  1. iR-ADV C2218、iR-ADV 8205/ 8285/ 8295、iR-ADV 6275/ 6255/ 6265に対応しました。
  2. LBP6710iに対応しました。
  3. MF8570Cdwに対応しました。
  4. iR-ADV 8205/ 8285/ 8295において、V折り小口トリムに対応しました。
  5. iR-ADV 8205/ 8285/ 8295、iR-ADV 6275/ 6255/ 6265において、製本シフトに対応しました。
  6. iR-ADV 8205/ 8285/ 8295において、ステイプルシフトに対応しました。
  7. LBP6710iにおいて、A5縦送りに対応しました。
  8. iR-ADV 8205/ 8285/ 8295、iR-ADV 6275/ 6255/ 6265において、排紙オプションに対応しました。
Ver.2.50からVer.2.60への変更点
  1. iR-ADV C9270/ 9280、iR-ADV C7260/ 7270、iR-ADV C5235/ 5240、iR-ADV C5250/ 5255、iR-ADV C2220/ 2230に対応しました。
  2. iR-ADV C9270/ 9280、iR-ADV C7260/ 7270、iR-ADV C5235/ 5240、iR-ADV C5250/ 5255、iR-ADV C2220/ 2230において、2色印刷機能に対応しました。
  3. Debパッケージの64bit化に対応しました。
  4. iR-ADV C5235/ 5240、iR-ADV C5250/ 5255において、ColorGear Ver.3.0に対応しました。
Ver.2.40からVer.2.50への変更点
  1. LBP9650Ci、LBP9510Cに対応しました。
  2. LBP9510Cにおいて、ドライバー側で印刷データを貯め置きし、ソート処理に対応しました。
  3. LBP9650Ci、LBP9510C、LBP7600Cにおいて、余白部のコントーン転送処理をスキップする仕様に変更しました。
  4. iR5065、iR5075、iR7105において、表紙/裏表紙の給紙部の値を修正しました。
Ver.2.20からVer.2.40への変更点
  1. LBP7600C、LBP6600に対応しました。
  2. iR-ADV 4045/ 4035、iR-ADV 4025に対応しました。
  3. セキュアプリント時のパスワード入力のダイアログ上の値域表記を「1 ~ 9999999」に変更しました。
Ver.2.10からVer.2.20への変更点
  1. LBP4510に対応しました。
  2. LBP6700に対応しました。
  3. iR-ADV C2020/ 2030、iR-ADV 8085/ 8095、iR-ADV 8105に対応しました。
  4. iR-ADV C2020/ 2030において、用紙種類として普通紙3/ラフ紙1/ラフ紙2/ラフ紙3を追加しました。
  5. iR-ADV 8085/ 8095、iR-ADV 8105、iR-ADV C2020/ 2030において、排紙オプションの選択肢を追加しました。
  6. iR-ADV C2020/ 2030において、デバイスの種類の選択肢を追加しました。
  7. ドライバーUI設定時、他のPDLに依存させない対策を行いました。
  8. PDLの非依存化に伴い、インストールパッケージモジュールの構成を変更しました。
  9. ドライバーUIのメイン画面にて、印刷ページを印刷範囲と印刷指定の2つのグループに分割しました。
  10. ドライバーUIの詳細設定画面にて、フィルターオプションTABの削除を行いました。
  11. シャープネスのスケールコントロールをコンボボックスまたはスピンボタンに変更しました。
  12. ドライバーUIの詳細設定画面にて、折り、折り詳細、製本印刷中とじ、印刷方法の機能をコンボボックスへ変更しました。
  13. ドライバーUIの詳細設定画面において、スクロール表示ができるように変更しました。
  14. iR-ADV 8085/ 8095、iR-ADV 8105、iR-ADV C7055/ 7065、iR-ADV C9065、iR-ADV C9075において、出力方法にホールド指定を追加しました。
Ver.2.00からVer.2.10への変更点
  1. iR-ADV 6055/ 6065、iR-ADV 6075に対応しました。
  2. LBP8630/ 8620/ 8610に対応しました。
  3. ColorGearにおいて、SELinuxの警告に対応しました。
  4. LBP8630/ 8620/ 8610において、トナー濃度に対応しました。
  5. iR-ADV 6075、iR-ADV 6055/ 6065のネットワーク接続環境において、モノクロキャリブレーション情報取得に対応しました。
  6. ColorGear色調整機能追加対応に伴い、マッチング方法と入力プロファイルのコントロールを追加しました。
  7. iR-ADV C7055/ 7065、iR-ADV C9065、iR-ADV C9075において、多機能折りに対応しました。
  8. 尾引き対応しました。
  9. iR-ADV 6075、iR-ADV 6055/ 6065において、排紙オプションに対応しました。
  10. 設定の保存ボタンを削除し、デフォルトに戻すボタンを追加しました。
Ver.1.90からVer.2.00への変更点
  1. iR-ADV C7065/ C7055に対応しました。
  2. iR-ADV C5051/ C5051F、iR-ADV C5045/ C5045F、iR-ADV C5035/ C5035F、iR-ADV C5030/ C5030Fに対応しました。
  3. iR-ADV C9075、iR-ADV C9065に対応しました。
  4. LBP7700Cに対応しました。
  5. iR-ADV C7055/ 7065、C9065/ 9075において、給紙方法に「カセット5 ~ 7」を追加しました。
  6. iR-ADV C5030/ 5035、C5045/ 5051、C7055/ 7065、C9065、C9075において、従来の「デバイスの地紋印字機能」の機能名称を「デバイスのセキュリティー印刷機能」へ変更しました。
Ver.1.80からVer.1.90への変更点
  1. LBP9600C/ 9500Cに対応しました。
  2. iR C2110に対応しました。
  3. iPR C1+に対応しました。
  4. LBP9600C/ 9500Cをご使用時、以下の機能に対応しました。
    ・ 特殊スムージングに対応しました。
    ・ 普通紙光沢処理に対応しました。
  5. iR C2110において、キャリブレーション情報取得に対応しました。
Ver.1.70からVer.1.80への変更点
  1. iR C4080、iR C3080/ C3580、iR C2550に対応しました。
  2. iR3225、iR3235/ 3245に対応しました。
  3. LBP4500、LBP3980、LBP3910/ 3930に対応しました。
  4. 動作確認済みOSとして、SUSE Linux 11.0 (OpenSUSE) (32/ 64bit)、Fedora 9 (32/ 64bit) 、Ubuntu 8.04 Desktop (32bit) 、Vine Linux 4.2 (32bit) を追加しました。
  5. iR3225、iR3235/ 3245、LBP4500において、IPv6に対応しました。
  6. ホールドキュー対応機種において、[ホールド] とグループステイプルの指定が不可になる排他を追加しました。
  7. iPR C1において、地紋印刷機能とシャープネスの同時使用ができないような排他を追加しました。
  8. ボックス機能対応機種において、[保存するデータ名称] のデフォルト動作を[ファイル名を使用]に変更しました。
  9. 用紙タイプの坪量表示を非表示にし、用紙タイプのみを表示に変更しました。
Ver.1.60からVer.1.70への変更点
  1. LBP5910/ 5910Fに対応しました。
  2. iR C5880/ iR C6880、iR C5880N/ iR C6880Nに対応しました。
  3. 動作確認済みOSとして、SUSE Linux 10.3 (openSUSE) (32/ 64bit)、Fedora 8 (32/ 64bit) 、Ubuntu 7.10 Desktop (32bit) 、Vine linux 4.1 (32bit) を追加しました。
  4. 以下の機種において、部単位シフトに対応しました。
    *iR5055/ iR5065、iR5075、iR7086/ iR7095/ iR7105
    *iR C2880/ iR C2880F、iR C3380/ iR C3380F、iR C3880/ iR C4580、iR C5180、iR C5185、iR C5880/ iR C6880、iR C5880N/ iR C6880N、iPR C1
  5. 以下の機種において、印字開始位置に対応しました。
    *iR5055/ iR5065、iR5075、iR7086/ iR7095/ iR7105、iR7270N、iR8570N、iR105i
    *iR C2880/ iR C2880F、iR C3380/ iR C3380F、iR C3880/ iR C4580、iR C5180、iR C5185、iR C5880/ iR C6880、iR C5880N/ iR C6880N、iPR C1
  6. iPR C1において、シャープネスに対応しました。
  7. 以下の機種において、ガターシフトに対応しました。
    *iR5055/ iR5065、iR5075、iR7086/ iR7095/ iR7105
    *iR C2880/ iR C2880F、iR C3380/ iR C3380F、iR C3880/ iR C4580、iR C5180、iR C5185、iR C5880/ iR C6880、iR C5880N/ iR C6880N、iPR C1
  8. 以下の機種において、断裁幅に対応しました。
    *iR7086/ iR7095/ iR7105、iR7270N、iR8570N、iR105i
  9. 以下の機種において、C折り/折り詳細に対応しました。
    *iR5055/ iR5065、iR5075
  10. 以下の機種において、PDL毎の地紋に対応しました。
    *iR5055/ iR5065、iR5075、iR7086/ iR7095/ iR7105
    *iR C2880/ iR C2880F、iR C3380/ iR C3380F、iR C3880/ iR C4580、iR C5180、iR C5185、iR C5880/ iR C6880、iR C5880N/ iR C6880N、iPR C1
  11. 以下の機種において、ライン処理に対応しました。
    *LBP5910
    *iR C2880/ iR C2880F、iR C3380/ iR C3380F、iR C3880/ iR C4580、iR C5180、iR C5185、iR C5880/ iR C6880、iR C5880N/ iR C6880N、iPR C1
  12. iR C5880/ iR C6880 において、従来のフィニッシャのオプショントレイに対するトレイエイリアスを変更しました。
  13. 地紋印字機能対応に伴い、フィニッシングタブ内の部数印字コントロールを[仕上げ詳細]ダイアログに移動しました。
  14. C折り/折り詳細対応に伴い、排紙方法の[回転]と[Z折り]の位置を入れ替えました。
  15. LBP5910Fにおいて、ステイプルに対応しました。
Ver.1.50からVer.1.60への変更点
  1. iR3025、iR3035/ 3045、iR5075、iR5055/ 5065に対応しました。
  2. iR C5185に対応しました。
  3. 動作確認済みOSは、Red Hat Enterprise Linux v.5 (32/ 64bit) 、Fedora 7 (32/ 64bit) 、Ubuntu 7.04 Desktop (32bit) 、Debian GNU/ Linux 4.0 (32bit) です。
  4. iR C5180 (※1) 、iR C3880/ C4580 (※1) 、iR C5185においてジョブホールドキューに対応しました。
  5. LBP3410において小サイズカール機能 (小サイズの用紙が熱で曲がらないように、定着温度を調整する機能) に対応しました。
  6. LBP3410において特殊印字モード (高温多湿環境で発生する画像不良を回避するため) に対応しました。
  7. iPR C1において用紙タイプ「ベラム1」を削除しました。
    ※1 本体のバージョンアップを行う必要があります。
Ver.1.40からVer.1.50への変更点
  1. LBP3970/ 3920、iR3045/ 3035/ 3025、iR C5180/ C4580/ C3880/ C3380/ C2880、imagePRESS C1に対応しました。
  2. SUSE Linux 10.2 (openSUSE) 、Fedora Core 6に対応しました。
  3. LBP3970/ 3920において特殊印字モードに対応しました。
  4. iR4570/ 3570/ 2870/ 2270において細線補正機能に対応しました。
Ver.1.30からVer.1.40への変更点
  1. LBP5900/ 3950/ 3900/ 3410、MF7240/ 7210/ 7140/ 7110/ 6570、iR7105/ 7095/ 7086、iR C6870/ 5870に対応しました。
  2. Fedora Core 5 (32bit/ 64bit) 、Debian GNU/ Linux 3.1 rev2に対応しました。
  3. LBP3950/ 3900において特殊印字モードに対応しました。
  4. iR7105/ 7095/ 7086において表紙/裏表紙設定に対応しました。
Ver.1.20からVer.1.30への変更点
  1. 64-bitOS (Intel EM64T/ AMD64プロセッサー搭載マシン) に対応しました。
  2. 動作確認済み64-bitOSはTurbolinux10 Enterprise Server、MIRACLE LINUX V4.0 (Asianux Inside) x64 Edition、Red Hat Enterprise Linux v.4 x64 Edition、SUSE Linux 10.0 (open SUSE) x64 Edition、Fedra Core4 x64 Editionです。
  3. 動作確認済み32-bitOSとしてTurbolinux10 FUJI、MIRACLE LINUX V4.0 (Asianux Inside) 、Red Hat Enterprise Linux V.4、SUN Java Desktop System Release3、Fedora Core4に対応しました。
  4. iR105i/ iR8570/ iR7270Nのおいて細線補正に対応しました。
Ver.1.10からVer.1.20への変更点
  1. 動作確認済OSとして Novell SUSE Linux9.2に対応しました。
  2. 動作確認済OSとして Novell SUSE Linux9.3に対応しました。
  3. iR2230、iR5570/ 6570に対応しました。
  4. OHP中差し機能に対応しました。
  5. 部番印刷機能に対応しました。

動作環境

動作確認済OS

【Ver.5.50の動作確認済OS】

  • Debian 11.1 (Intel/AMD 32bit/64bit、ARM 64bit)
  • Fedora 30 (Intel/AMD 32bit)
  • Fedora 35 (Intel/AMD 64bit、ARM 64bit)
  • Ubuntu 18.04 Desktop (Intel/AMD 32bit)
  • Ubuntu 21.10 Desktop (Intel/AMD 64bit、ARM 64bit)
  • CentOS 8.5 (Intel/AMD 64bit、ARM 64bit)
  • UOS 20 Desktop (Intel/AMD 64bit、ARM 64bit、MIPS 64bit)
  • Kylin OS V10 SP1 Desktop (Intel/AMD 64bit、ARM 64bit、MIPS 64bit)
  • NeoKylin OS V7 Desktop (MIPS 64bit)

    【Ver.5.40の動作確認済OS】

  • Debian 10.9 (Intel/AMD 32bit/64bit、ARM 64bit)
  • Fedora 30 (Intel/AMD 32bit)
  • Fedora 34 (Intel/AMD 64bit、ARM 64bit)
  • Ubuntu 14.04 Desktop (Intel/AMD 32bit/64bit)
  • Ubuntu 18.04 Desktop (Intel/AMD 32bit)
  • Ubuntu 21.04 Desktop (Intel/AMD 64bit、ARM 64bit)
  • CentOS 7.9 (Intel/AMD 64bit、ARM 64bit)
  • CentOS 8.3 (Intel/AMD 64bit、ARM 64bit)
  • UOS 20 Desktop (Intel/AMD 64bit、ARM 64bit、MIPS 64bit)
  • Kylin OS V10 Desktop (Intel/AMD 64bit、ARM 64bit、MIPS 64bit)
  • NeoKylin OS V7 Desktop (MIPS 64bit)

    【Ver.5.30の動作確認済OS】

  • Debian 8.11 (Intel/AMD 32bit/64bit)
  • Debian 10.6 (Intel/AMD 32bit/64bit、ARM 64bit)
  • Fedora 30 (Intel/AMD 32bit/64bit)
  • Fedora 33 (Intel/AMD 64bit、ARM 64bit)
  • Ubuntu 14.04 Desktop (Intel/AMD 32bit/64bit)
  • Ubuntu 18.04 Desktop (Intel/AMD 32bit)
  • Ubuntu 20.10 Desktop (Intel/AMD 64bit、ARM 64bit)
  • CentOS 7.9 (Intel/AMD 64bit、ARM 64bit)
  • UOS 20 Desktop (Intel/AMD 64bit、ARM 64bit、MIPS 64bit)
  • Kylin OS V10 Desktop (Intel/AMD 64bit、ARM 64bit、MIPS 64bit)
  • NeoKylin OS V7 Desktop (MIPS 64bit)

    【Ver.5.20の動作確認済OS】

  • CentOS 7.7 (64bit)
  • CentOS 7.8 (64bit)
  • Debian 10.3 (32bit/ 64bit)
  • Debian 10.4 (32bit/ 64bit)
  • Fedora 30 (32bit)
  • Fedora 31 (64bit)
  • Fedora 32 (64bit)
  • Ubuntu 18.04 (32bit)
  • Ubuntu 19.10 Desktop (64bit)
  • Ubuntu 20.04 Desktop (64bit)

    【Ver.5.10の動作確認済OS】

  • CentOS 7.7 (64bit)
  • Debian 10.1 (32bit/ 64bit)
  • Debian 10.2 (32bit/ 64bit)
  • Fedora 31 (64bit)
  • Ubuntu 19.10 Desktop (64bit)

    【Ver.5.00の動作確認済OS】

  • CentOS 7.6 (64bit)
  • Debian 8.11 (32bit/ 64bit)
  • Debian 9.8 (32bit/ 64bit)
  • Debian 9.9 (32bit/ 64bit)
  • Fedora 30 (32bit/ 64bit)
  • Ubuntu 19.04 Desktop (64bit)

ハードウエア

上記動作確認OSが動作するコンピューター